Wednesday, December 28, 2011

How Does a Garage Door Opener Work?

!9#: How Does a Garage Door Opener Work?

I bet you have heard a lot about the benefits of using a garage door opener. But do you know how exactly it works? This is a question that merits a little pondering.

Before anything else, you have to know the types of garage door operators. They come in three forms-the belt-driven operators, chain-driven operators and screw-driven operators. They basically function in the same way but the materials are different.

For belt-driven operators, it uses direct current motor which is what gives it its trademark quiet and whisper-soft functions. This is actually more sophisticated and more secure because their security codes allow frequent changing and no repetition of codes so nobody can decode it. If this is your choice, you have to choose one that has integrated steel belt as it has more power in lifting garage doors.

Screw-driven operators are slightly less expensive. What is great about this is that it does not need a lot of fussy maintenance. It does not hold a torch with belt-driven but it does have a few nifty features to boast of. There is the standard light beam detector that can detect if something is obstructing its path and to reverse its course to prevent crashing into something. There is also the new and improved rolling code system that gives your home security so nobody else can hack into your system.

Chain driven technology is the most commonly used technology because they are cheaper. It has a lot of muscle in lifting heavier doors. It is rather noisy as there are mot parts moving. The metal chain rub against the metal trolley which is what causes the noise.

There are also those that have keyless pads included in the package. These pads can be mounted on your garage wall or the transmitters can be carried as a remote controller. It can conform to any technology, especially to belt-driven technology. It makes your life more convenient because you do not have to get out of your car to key in your garage door code.

When choosing a garage door opener, opt for belt-driven if you are willing to invest in a sophisticated machine. Otherwise, you can go for screw-driven ones as they are more secure.


How Does a Garage Door Opener Work?

Bike Trailers For Babies Save You Money! Trampoline Rebounding Order Now Discount True Treadmills

Monday, December 5, 2011

Sears alternation drive barn aperture opener accessory replacement.wmv

My Sears chain drive garage door opener 's main gear is worn. I replaced just the main gear with the sprocket and shaft assembly for or so from a supplier at Amazon. I did not have to remove the unit nor the motor from the installed position making this an easier job. Remove the two screws from the end panel with the controls and leave the circuit board hanging. That way you can have room to unscrew the 3 screws at the top. You have to use the screw you removed to tap the holes in the replacement part. The holes are not threaded. Working on the ladder can be dangerous. If you installed the opener yourself, you can probably replace the gear. Work safely. This video should be viewed from a PC, Otherwise, the annotations clarifying the process will not be seen.

!9# Buy Hayward Pool Pumps New Trampoline Alley Oop !9# Swiffer Vacuum Cleaner sale




Sponsor Links